登录
注册
M6e-Micro-LTE RFID UHF超高频读写模块/模组简介：
M6e-Micro-LTE (Low Tag-read Enabled) 与 M6e-Micro一样，采用超小型模组结构设计,和优异的“快速搜索算法”适用于手持和固定式读写器和打印机等，尤其是快速移动的标签读取。具有功耗低的特点，通过电池供电，射频输出范围(-5dBm到+30dBm)，这也是RFID标签打印机、调试台和POS机阅读器等应用的一个关键要求。有两个天线端口，并支持EPCglobal的Gen2和ISO18000-6C协议。Micro模组设计适用于中型到大型的标签“群读”应用，而Micro-LTE则针对较小的标签“群读”优化，尤其适合收费、车辆管理、比赛计时和门禁访问控制中的应用。Micro-LTE是专为大批量的生产环境设计，支持传统的板对板的安装和焊接下表面安装，从而为设备制造商减少了组件和组装的成本。
M6e-Micro-LTE
Low profile embedded RFID Reader
optimized for small tag populations
The Micro-LTE is designed to meet the demands of high performance RFID handheld, mobile, and stationary readers and is optimized for applications that require reading small tag populations. This embedded UHF RFID Reader offers two antenna ports and supports the ability to transmit up to +30 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The on-board connectors allow the module to be mated to a motherboard as an add-on option.
M6e-Micro-LTE (Low Tag-read Enabled) 与 M6e-Micro一样，采用超小型模组结构设计,和优异的“快速搜索算法”适用于手持和固定式读写器和打印机等，尤其是快速移动的标签读取。具有功耗低的特点，通过电池供电，射频输出范围(-5dBm到+30dBm)，这也是RFID标签打印机、调试台和POS机阅读器等应用的一个关键要求。有两个天线端口，并支持EPCglobal的Gen2和ISO18000-6C协议。Micro模组设计适用于中型到大型的标签“群读”应用，而Micro-LTE则针对较小的标签“群读”优化，尤其适合收费、车辆管理、比赛计时和门禁访问控制中的应用。Micro-LTE是专为大批量的生产环境设计，支持传统的板对板的安装和焊接下表面安装，从而为设备制造商减少了组件和组装的成本。
M6e-Micro-LTE
Low profile embedded RFID Reader
optimized for small tag populations
The Micro-LTE is designed to meet the demands of high performance RFID handheld, mobile, and stationary readers and is optimized for applications that require reading small tag populations. This embedded UHF RFID Reader offers two antenna ports and supports the ability to transmit up to +30 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The on-board connectors allow the module to be mated to a motherboard as an add-on option.